Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Revision to Root


Welcome to the Wiki for the Duet 2 (Wifi, Ethernet Maestro), Duet 0.8.5, and the Duet 0.6 - a family of control boards for 3D printers and other similar robots. These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]]. They all have a connector for an expansion board containing additional stepper drivers and I/O circuitry - the DueX4 for the Duet 0.6 and 0.8.5, and the DueX2 and DueX5 for the Duet 2 (WiFi and Duet Ethernet).
+Please see the [[Step by step guide]] to get started with your Duet.
+For troubleshooting please start with the [[FAQ]]
== Documentation Categories ==
== Hardware Features ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes