Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to Root

Tony

== Introduction ==
-Welcome to the Wiki for the Duet 2 (Wifi and Ethernet), Duet 0.8.5, and the Duet 0.6 - a family of control boards for 3D printers and other similar robots. These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]]. They all have a connector for an expansion board containing additional stepper drivers and I/O circuitry - the DueX4 for the Duet 0.6 and 0.8.5, and the DueX2 and DueX5 for the Duet 2 (WiFi and Duet Ethernet).
+Welcome to the Wiki for the Duet 2 (Wifi, Ethernet Maestro), Duet 0.8.5, and the Duet 0.6 - a family of control boards for 3D printers and other similar robots. These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]]. They all have a connector for an expansion board containing additional stepper drivers and I/O circuitry - the DueX4 for the Duet 0.6 and 0.8.5, and the DueX2 and DueX5 for the Duet 2 (WiFi and Duet Ethernet).
== Documentation Categories ==
* [guide|7|Getting connected Guide]
* [[Firmware Overview#Section_SD_card_structure|SD card folder structure]]
-* Firmware configfuration
+* Firmware configuration
** [[ConfiguringRepRapFirmwareCartesianPrinter|Configuring RepRapFirmware for a Cartesian printer]]
** [[ConfiguringRepRapFirmwareDeltaPrinter|Configuring RepRapFirmware for a Delta printer]]
== Compatible add on Hardware ==
-There are a range of compatible add on hardware optionals for the Duet Range of electronics:
+There are a range of compatible add on hardware options for the Duet Range of electronics:
* [[Smart effector and carriage adapters for delta printer]]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes