Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to Root

Tony

Welcome to the Wiki for the Duet 3, Duet 2 (WiFi, Ethernet and Maestro) and legacy Duets (0.6 and 0.8.5) - control boards for 3D printers and other similar robots.
-These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]].
+These control boards are based on a 32-bit ARM processors, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]].
They all have expansion capabilities, for additional stepper drivers and I/O circuitry. '''Duet 3''' expansion is via the CAN-FD bus, and can connect to multiple Duet 3 Expansion and Tool boards. Duet 2 and legacy Duets have a connector for an expansion board. For the '''Duet 2 WiFi and Ethernet''' there is the Duex 2 / Duex 5 and the Duet Expansion Breakout board (for external drivers). For the '''Duet 2 Maestro''' there is the Dual Stepper Expansion. For legacy Duets there is the DueX4. See the relevant [[Topic:Duet Hardware]] section for details.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes