Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to Root

Ian A-S

== Introduction ==
-Welcome to the Wiki for the Duet 3, Duet 2 (Wifi, Ethernet Maestro),and legacy Duets - control boards for 3D printers and other similar robots.
+Welcome to the Wiki for the Duet 3, Duet 2 (WiFi, Ethernet and Maestro) and legacy Duets (0.6 and 0.8.5) - control boards for 3D printers and other similar robots.
-See the [[Topic:Duet 3 Hardware|Duet 3 Hardware]] Wiki section for Duet 3 documentation.
+These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]].
-For Duet 2 and legacy boards please see below.
-
-These control boards are based on a 32-bit ARM processor, running [[Firmware_Overview|RepRapFirmware]]. The Duet family can all be controlled through a [[Duet_Web_Control_Manual|web interface]], but they also support a touchscreen called the [[PanelDue]]. They all have a connector for an expansion board containing additional stepper drivers and I/O circuitry - the Duex 2 and Duex 5 for the Duet 2 (WiFi and Ethernet), and the legacy DueX4 for the Duet 0.6 and 0.8.5, and
+They all have expansion capabilities, for additional stepper drivers and I/O circuitry. '''Duet 3''' expansion is via the CAN-FD bus, and can connect to multiple Duet 3 Expansion and Tool boards. Duet 2 and legacy Duets have a connector for an expansion board. For the '''Duet 2 WiFi and Ethernet''' there is the Duex 2 / Duex 5 and the Duet Expansion Breakout board (for external drivers). For the '''Duet 2 Maestro''' there is the Dual Stepper Expansion. For legacy Duets there is the DueX4. See the relevant [[Topic:Duet Hardware]] section for details.
== START HERE ==
[[FAQ]]
-== Hardware Features ==
-
-The links below contain information the features of the Duet 3d printer electronics and compatible addon hardware
-
-* [[Hardware_Overview|Duet 2 (Wifi and Ethernet) Features]]
-* [[Duex2 and Duex5 Features]]
-* [[Topic:Addon Hardware|Addon Hardware]]
-
-== Getting started with the Duet 2 WiFi or Ethernet ==
+== Getting started with the Duet electronics ==
=== If you are not familiar with Duet electronics or RepRapFirmware ===
* [[Duet_Web_Control_Manual|Using Duet Web Control]]
* List of RepRapFirmware Supported [[Gcode]]s
-
-=== If you are already familiar with Duet electronics and RepRapFirmware ===
-
-* [[Hardware_Overview#Section_Hardware_difference_between_Duet_2_and_Duet_0_8_Num_5|Hardware differences from the Duet 0.8.5]]
-* [[Firmware_Overview#Section_Duet_WiFi|Firmware file names]]
-* [[Firmware_Overview#Section_Changes_to_config_gcodes_and_firmware_behaviour_between_Duet_2_and_Duet_0_8_5_0_Num_6|Changes to config gcodes and firmware behaviour]]
=== Quick start guide ===
* [[Temperature_sensors|Choosing temperature sensors]]
-== Hardware and Wiring (Gen 2 Duets) ==
+== Hardware and Wiring ==
-The connectors and general layout of the board are summarized in the [[Duet Wiring Diagrams]].
+The connectors and general layout of the board are summarized in the relevant section here [[Topic:Duet Hardware]].
-* [[Hardware overview]]
* [[FireSafety|Fire safety]]
* [[Mounting and cooling the board]]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes