M300
Back to the Gcode Dictionary
M300: Play beep sound
Parameters
- Snnn frequency in Hz
- Pnnn duration in milliseconds
Example
- M300 S300 P1000
Play beep sound, use to notify events like the end of printing. If an LCD device is attached to RepRapFirmware, a sound is played via the add-on touch screen control panel. Else the web interface will play a beep sound.
Note: If you intend to play multiple notes in a row, you will need to insert a G4 delay command between them at least equal to the length of the tone.
Ex:
M300 S2000 P200 G4 P200 M300 S2500 P300 G4 P300
0 Comments