Back to the Gcode Dictionary
M105: Get Extruder Temperature
- This command can be used without any additional parameters.
- Rnnn Response sequence number1
- Snnn Response type1
- M105 S2
Request the temperature of the current extruder and the build base in degrees Celsius. Reports the current and target temperatures of all active heaters.
1 Returns a JSON-formatted response if parameter S2 or S3 is specified. Additionally, parameter Rnn may be provided, where nn is the sequence number of the most recent G-code response that the client has already received. M105 S2 is equivalent to M408 S0, and M105 S3 is equivalent to M408 S2. Usage of these forms of M105 is deprecated, please use M408 instead.