Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to WiFi disconnections and AJAX timeout errors

Jason Znack

** Please note, MaxReps is reset when you run M122 so only the value the first time you run M122 after a disconnection or completion of a print is significant.
* Also if the connection is stable when the printer is idle but not when printing: could it be temperature-related? Does the disconnection occur when the CPU temperature displayed in DWC reaches a certain value? If so, try cooling the Duet with a fan, if you are not doing so already.
-* If unable to connect to your wireless network at boot up, try deleting all saved wifi networks with M588 "*" (That is, using an asterix for the network name), then re-adding it with M587. For example, M587 S"networkname" P"password".
+* If unable to connect to your wireless network at boot up, try deleting all saved wifi networks with M588 S"*" (That is, using an asterix for the network name), then re-adding it with M587. For example, M587 S"networkname" P"password".
* You can manually reset the wifi module if you have console access via USB, or a PanelDue. Send M552 S0, to disable networking, followed by M552 S1 to enable networking.
* Consider running the Duet 2 Wifi in access point mode. This way the Duet creates a network which you can join from your wireless enabled device, (eg, PC, tablet, phone, etc.) and connect to the DWC to perform further configuration.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes