Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to Using servos and controlling unused IO pins

David Crocker

| 64
| Z_PROBE_MOD
-| MOD on Z_PROBE connector
-| 3 on Z_PROBE connector
+| MOD on Z_PROBE connector, also SERVO on expansion connector
+| 3 on Z_PROBE connector, 11 on expansion connector
| yes
| yes

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes