Revision to Using mesh bed compensation
| == Define the mesh size and spacing == | |
| - | Use the [[Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid|M557]]command to define the spacing of the mesh that you want to set up, and either the X and Y limits or (for a delta printer) the probing radius. |
| + | Use the [[Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid|M557]] command to define the spacing of the mesh that you want to set up, and either the X and Y limits or (for a delta printer) the probing radius. |
| Example for a Cartesian or CoreXY printer: |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.