Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to Using mesh bed compensation

Tony

== Define the mesh size and spacing ==
-Use the [[Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid|M557]]command to define the spacing of the mesh that you want to set up, and either the X and Y limits or (for a delta printer) the probing radius.
+Use the [[Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid|M557]] command to define the spacing of the mesh that you want to set up, and either the X and Y limits or (for a delta printer) the probing radius.
Example for a Cartesian or CoreXY printer:

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes