Revision to Using M581 - External Triggers and Building a Control Panel
| } | |
| - | If you look closely you'll see that I used 2P Dupont connectors but one of the pins has a wire going to it. This is because 1P connectors kept falling off so I put a wire in one side of a 2P connector with just an empty pin in the other side. |
| + | If you look closely you'll see that I used 2P Dupont connectors but only one of the pins has a wire going to it. This is because 1P connectors kept falling off so I put a wire in one side of a 2P connector with just an empty pin in the other side. |
| [br] |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.