https://docs.duet3d.com/
Help

Revision to Test axes or motors individually

Ian A-S

|--
| G1 H2 Y10
-| Print head moves 10mm in the +Y direction
+| Print head moves (relative to bed, if bed moves) 10mm in the +Y direction
| Print head moves 5mm in the +X direction and 5mm in the -Y direction
| Y carriage moves up 10mm
|--
| G1 H2 Y-10
-| Print head moves 10mm in the -Y direction
+| Print head moves (relative to bed, if bed moves) 10mm in the -Y direction
| Print head moves 5mm in the -X direction and 5mm in the +Y direction
| Y carriage moves down 10mm
|--
| G1 H2 Z10
-| Print head moves 10mm in the +Z direction
-| Print head moves 10mm in the +Z direction
+| Distance between bed and nozzle increases 10mm in the Z direction
+| Distance between bed and nozzle increases 10mm in the Z direction
| Z carriage moves up 10mm
-| Print head moves 10mm in the +Z direction
+| Distance between bed and nozzle increases 10mm in the Z direction
|--
| G1 H2 Z-10
-| Print head moves 10mm in the -Z direction
-| Print head moves 10mm in the -Z direction
+| Distance between bed and nozzle decreases 10mm in the Z direction
+| Distance between bed and nozzle decreases 10mm in the Z direction
| Z carriage moves down 10mm
-| Print head moves 10mm in the -Z direction
+| Distance between bed and nozzle decreases 10mm in the Z direction
}

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes