https://docs.duet3d.com/
Help

Revision to Test axes or motors individually

David Crocker

| G1 H2 X10 F100
| Print head moves 10mm in the +X direction
-| Print head moves 5mm in the +X direction and 5mm in the -Y direction
+| Print head moves 5mm in the +X direction and 5mm in the +Y direction
| X carriage moves up 10mm
| Proximal arm moves anticlockwise 10 degrees
| G1 H2 X-10
| Print head moves 10mm in the -X direction
-| Print head moves 5mm in the -X direction and 5mm in the +Y direction
+| Print head moves 5mm in the -X direction and 5mm in the -Y direction
| X carriage moves down 10mm
| Proximal arm moves clockwise 10 degrees
| G1 H2 Y10
| Print head moves 10mm in the +Y direction
-| Print head moves 5mm in the -X direction and 5mm in the +Y direction
+| Print head moves 5mm in the +X direction and 5mm in the -Y direction
| Y carriage moves up 10mm
| Distal arm moves anticlockwise 10 degrees
| G1 H2 Y-10
| Print head moves 10mm in the -Y direction
-| Print head moves 5mm in the +X direction and 5mm in the -Y direction
+| Print head moves 5mm in the -X direction and 5mm in the +Y direction
| Y carriage moves down 10mm
| Distal arm moves clockwise 10 degrees

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes