Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Prerequisites for using the Duet

Tony

* A computer connected to the network, with an available USB port, and a micro USB cable (supplied with the Duet).
* A computer, tablet or smartphone with WiFi client capability (this could be the same as the previous item, or a different device).
** Chrome and Firefox definitely work well with DuetWebControl, [[File_uploads_or_other_DWC_features_not_working|EdgeDuet_Web_Control_Manual#Section_Browser_Compatibility|Edge, IE and Safari may have problems.]]
** Chrome and Firefox definitely work well with DuetWebControl, [[File_uploads_or_other_DWC_features_not_working|EdgeDuet_Web_Control_Manual#Section_Browser_Compatibility|Edge, IE and Safari may have problems.]]
* A 3D printer with accessible cabling, for the Duet WiFi to control.
 
* A computer connected to the network, with an available USB port, a micro USB cable (supplied with the Duet).
** This computer could be connected to the network via Wifi or Ethernet. After the initial setup over USB then any device connected to the network that runs a compatible web browser can be used (e.g a smartphone or tablet) to control the Duet.
** Chrome and Firefox definitely work well with DuetWebControl, [[File_uploads_or_other_DWC_features_not_working|EdgeDuet_Web_Control_Manual#Section_Browser_Compatibility|Edge, IE and Safari may have problems.]]
** Chrome and Firefox definitely work well with DuetWebControl, [[File_uploads_or_other_DWC_features_not_working|EdgeDuet_Web_Control_Manual#Section_Browser_Compatibility|Edge, IE and Safari may have problems.]]
* A 3D printer with accessible cabling, for the Duet WiFi to control.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes