Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help
/

Site Navigation

Your Account

Choose Language

Revision to Power Wiring

Tony

== Bed heater power ==
-The Duet boards are designed to power the heated bed (or the solid-state relay controlling it) from the same power supply as they power everything else. The Duet WiFi is able to supply 18A to a heated bed. If you still want to use a second supply to power the bed (still not exceeding the 18A the Duet can sink), it is possible to arrange this; see [[Wiring and hardware differences from RAMPS etc.]] for details.
+The Duet boards are designed to power the heated bed (or the solid-state relay controlling it) from the same power supply as they power everything else. The Duet WiFi is able to supply 18A to a heated bed. If you still want to use a second supply to power the bed (still not exceeding the 18A the Duet can sink), it is possible to arrange this; see [[Wiring and hardware differences from RAMPS etc]] for details.
== Standby power ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes