Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to PanelDue

Tony

* 4-wire cable to connect the PanelDue to your controller board for the serial and power connections.
 
There is more information on how to connect it to the duet here:[[Connectinghere: [[Connecting an LCD control panel#Section_Connecting_a_PanelDue|Connecting a PanelDue]], with detailed documentation available on [https://miscsolutions.wordpress.com/paneldue/|DC42's PanelDue web page].
There is more information on how to connect it to the duet here:[[Connectinghere: [[Connecting an LCD control panel#Section_Connecting_a_PanelDue|Connecting a PanelDue]], with detailed documentation available on [https://miscsolutions.wordpress.com/paneldue/|DC42's PanelDue web page].
 
A PanelDue v1.1 with a 4.2" screen:
== PanelDue Integrated ==
 
This integrated version has a 7" TFT LCD panel with the PanelDue controller by David Crocker integrated on the 7 inch LCD's PCB. Features:-

=== Features ===
This integrated version has a 7" TFT LCD panel with the PanelDue controller by David Crocker integrated on the 7 inch LCD's PCB. Features:-

=== Features ===
 
* Resolution of  800×480 pixels on a 7 inch LCD.
* 5V power from host 3D printer controller.
* 2-wire async serial interface with 3.3V signal level (5V tolerant input). This is presented as a 4 pin header with 5V, Gnd and the two serial wires.
* 2-wire async serial interface with 3.3V signal level (5V tolerant input). This is presented as a 4 pin header with 5V, Gnd and the two serial wires.
* Connections to the onboard micro SD card socket as well as the PanelDue serial and power connections are all available via a 10-way ribbon cable.  A 300mm long ribbon cable is the maximum recommended length.
* There is more information on how to connect it to the duet here: [[Connecting an LCD control panel#Section_Connecting_a_PanelDue|Connecting a PanelDue]].
 
[image|392|size=large|align=center]
 
[image|509|size=large|align=center]
 
=== Dimensions ===
 
==== Front ====
 
[image|506|size=large|align=center]
 
==== Side ====
 
[image|507|size=large|align=center]
 
==== Back ====
 
[image|508|size=large|align=center]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes