https://docs.duet3d.com/
Help

Revision to Neopixel and DotStar LEDs

David Crocker

You will need to supply external 5V power to the adjacent 5V_IN connector, unless you connected the 5V line of your LED strip directly to an external 5V supply. The 5V regulator on the Duet 3 Mini is rated at 1A total and cannot be used to power LED strips.
-In firmware versions prior to 3.3 the maximum supported number of Neopixel LEDs in a strip is 60 RGB LEDs. Firmware 3.3 supports up to 80 RGBW LEDs or 106 RGB LEDs. The firmware limit for DotStar LEDs is several thousand.
+In firmware versions prior to 3.3 the maximum supported number of Neopixel LEDs in a strip is 60 RGB LEDs. Firmware 3.3 supports up to 80 RGBW LEDs or 106 RGB LEDs.
== Connecting NeoPixel strips to Duet 2 Wifi or Ethernet ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes