Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to M503

Steve Miller

+[title|M503]
+
+
+==== M503: Print settings ====
+
+***Example***
+
+* M503
+
+This command asks the firmware to reply with the current print settings stored in sys/config.g. The reply output includes the G-Code commands to produce each setting. For example, the Steps Per Unit values are displayed as an M92 command.
+
+Note that the output may be truncated if it is too long. M503 does ***not*** include values stored in config-override.g.