Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to M303

Александр Пивоваров

[title|M303]
+
+[summary]08.10.2021
+
+Just removed misspell
+
+Ynn (RRF 3.3beta3 and laterm optional) <----here[/summary]
* ***Tnnn*** (RRF 3.2 and later, optional) Tool whose primary heater is to be tuned
* ***Annn*** (RRF 3.2 and later, optional) ambient temperature - use this parameter if you want to tune a heater that has been on and has not cooled down to ambient temperature yet
-* ***Ynn*** (RRF 3.3beta3 and laterm optional) Tuning cycle hysteresis, default 5C. When tuning bed heaters that are slow to cool down, tuning will be faster if you use a lower value, provided that there is no noise in the temperature readings.
+* ***Ynn*** (RRF 3.3beta3 and later optional) Tuning cycle hysteresis, default 5C. When tuning bed heaters that are slow to cool down, tuning will be faster if you use a lower value, provided that there is no noise in the temperature readings.
* ***F***nn (RRF 3.3beta3 and later) Fan PWM to use when the print cooling fan is turned on (ignored if the T parameter is not present), default 1.0. Use a lower value if youpr printer uses a powerful print cooling fan that you do not normally run at full PWM.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes