Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to M292

Steve Miller

+[title|M292]
+
+
+==== M292: Acknowledge blocking message ====
+
+***Caution***: do not use this command in macros!
+
+***Parameters:***
+
+* ***Pnnn*** Whether the current operation shall be cancelled (P=1) or continued (P=0).
+
+This command is sent by the user interface when the user acknowledges a message that was displayed because of a M291 command with parameter S=2 or S=3. The P parameter is ignored unless M291 was called with S=3.
+
+Supported in firmware version 1.19 and later.