Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Jerky movement when printing

Tony

[title|Jerky movement when printing]
 
[summary]If your printer moves jerkly during printing, here are the most common causes:[/summary]
 
 
If your printer moves jerily during printing, here are the most common causes:
 
# Printing over USB with incorrect flow control. Preferably, print from the internal SD card if the Duet instead. If you must print via USB, set the host program on your PC so that it does not wait for an OK response after sending each command. To do this in Repetier Host, disable "ping-pong". To do this in Simplify3d, set flow control to "Hardware".

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes