Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Installing and Updating Firmware

David Crocker

# Press the Disconnect button in Pronterface, then when the USB port disappears and reappears about 20 seconds later, press Connect.
# Send M115 to confirm the new firmware version
# If the board is a Duet WiFi, send M997 S1'''M997 S1''' to install the WiFi module firmware
# If the board is a Duet WiFi, send M997 S1'''M997 S1''' to install the WiFi module firmware
 
Note: when you run M997 S0, isif your board is a Duet WiFi or Ethernet running old firmware, you may get an error message telling you that file DuetWiFiFirmware.bin or DuetEthernetFirmware.bin was not found. If that happens, copy or rename the Duet2CombinedFirmware.bin file to that filename and try again.
Note: when you run M997 S0, isif your board is a Duet WiFi or Ethernet running old firmware, you may get an error message telling you that file DuetWiFiFirmware.bin or DuetEthernetFirmware.bin was not found. If that happens, copy or rename the Duet2CombinedFirmware.bin file to that filename and try again.
 
== Fallback procedure #2 ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes