Skip to main content

Site Navigation

Your Account

Choose Language


Revision to Hardware Overview


* Provision of a miniblade fuse for the Motors and heaters - Supplied with a 7.5A fuse
* Provision of a miniblade fuse for the Heatbed - Supplied with a 15A fuse.
* The Z probe input improved to tolerate inputs up to 30V.
* The endstop inputs will tolerate at least 8V.
* Replaced erase switch with an erase jumper
* Changes to some layouts, and trace routing to further improve EMI performance.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes