Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Revision to Hardware Overview


[title|Duet 2 Hardware Overview]
[summary]Overview of Duet 2 Wifi and Duet 2 Ethernet hardware[/summary]
The Duet 2 Wifi and Duet 2 Ethernet both use the same Duet 2 base controller board. The difference is only in the communications module. This base controller board has gone through a number of PCB design revisions. The revision number is marked on the silkscreen on the board, to the left of the large processor chip. the linked page has more information on the [[Version Numbering]] system.
+==== PCB revision v1.04a,b,c ====
+Further minor component value change/tweaks to improve 5V regulator and EMI performance.
==== PCB revision v1.04 ====

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes