Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Hardware Overview

Tony

* Fans can be powered from [[Glossary_of_Terms#VIN|VIN]] , from +5V, or using external power supplied through the centre pin of the [[Glossary_of_Terms#VIN|VIN]] /5V selector block
* Higher bed heater circuit current rating (18A)
* Support for thermocouple and RTDPT100 daughter boards
* Support for thermocouple and RTDPT100 daughter boards
* Connector for a second Z motor
* Supply voltage monitoring, facilitating print resume-after-power-fail function

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes