Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Going from Marlin on Arduino to RepRapFirmware on Duet

Jason Znack

** Print surface size
** Z Probe to Nozzle XYZ offset
** Origin location (0,0) AKA home position.
 
=== What electrical details are needed to configure RepRapFirmware? ===
** Probe trigger height
** Probe voltage
 
=== What firmware details are needed to configure RepRapFirmware? ===
 
* Speed settings
** Acceleration and Jerk values
*** Can be found in LCD menu or in configuration.h
** Extrusion multiplier
** Z offset
** Fan speeds
 
**
 
== Going from Marlin on Arduino to RepRapFirmware on Duet ==
 
If you're coming from Marlin and have access to the configuration.h files you check there for some of the values.
 
Note: Marlin uses MM/s for feed rates, RepRapFirmware uses MM/Min. To convert from one to the other you must either multiply or divide by 60. Example: 100mm/s = 6000mm/min.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes