Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help
/

Site Navigation

Your Account

Choose Language

Revision to G29

David Crocker

* ***Kn*** (supported in RRF 3.01-RC5 and later only, default 0) Z probe number
-If G29 is commanded with no S parameter, then file ***sys/mesh.g*** is run if it exists, otherwise the command behaves like G29 S0.
+If G29 is commanded with no S parameter, then file ***sys/mesh.g*** is run if it exists, and in RRF 3.3 and later any parameters present are passed to mesh.g. If sys/mesh.g is not present then the command behaves like G29 S0.
***Examples***

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes