Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to G-Codes not implemented

Tony

* M43: Stand by on material exhausted (use M591)
* M43: Pin report and debug (much of this functionality is available within M42, M581,M582, M583)
-* M48: Measure Z-Probe repeatability (use a macro)
+* M48: Measure Z-Probe repeatability ([https://forum.duet3d.com/topic/6962/m48-measure-z-probe-repeatability-and-print-to-serial-output|use a macro])
* M93: Send axis_steps_per_unit (use M92)
* M101: Turn extruder 1 on (Forward), Undo Retraction (use standard G1 commands, or G10 for firmware retraction)
* M150: Set display color (No demand/also should be configured on the display not by printer firmware)
* M155: Automatically send temperatures (hosts should use polling)
-* M160: Number of mixed materials (no use M567)
-* M163: Set weight of mixed material (no use M567 to define the ratios based on extrusion percentage not weight)
+* M160: Number of mixed materials ( use M567)
+* M163: Set weight of mixed material ( use M567 to define the ratios based on extrusion percentage not weight)
* M164: Store weights (Not required w/o M163)
* M165: Set multiple mix weights (use M567)
* M202: Set max travel acceleration (use M204)
-* M207: Calibrate z axis by detecting z max length (Clashed with existing meaning of M207)
+* M207: Calibrate z axis by detecting z max length (Clashed with existing meaning of M207, Use G1 H3 instead)
* M208: Set unretract length (Clashes with M208 Set axis max travel and can be achieved using M207)
* M209: Enable automatic retract (no demand)
* M210: Set homing feedrates (homing feedrates are specified in the home....g macros)
-* M211: Disable/Enable software [[Glossary_of_Terms#Endstop|endstop]]s (use M564)
+* M211: Disable/Enable software endstops (use M564)
* M212: Set Bed Level Sensor Offset (use G31)
* M218: Set Hotend Offset (use G10)

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes