Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to FAQ

David Crocker

If this is not the case ensure you are running the l[[Firmware Overview#Section_Checking_firmware_versions|latest stable versions of the firmware]] and Duet Web Control
 
=== What to do if your Duet won't respondMy prints come out mirrored ===
=== What to do if your Duet won't respondMy prints come out mirrored ===
 
The3D printers must be configured to use a right-hand coordinate system. If you have configured your printer to use a left-hand coordinate system, your prints will come out mirrored.

Looking at
the front of the printer. the most common arrangement using a right-hand coordinate system is:

* +X moves the print head to the right
* +Y moves wither the print head away from you (towards the rear of the printer), or the bed towards you (towards the front of the printer)

A few printers (e.g. the Ormerod) have +X moving the head towards you, and +Y moving either the head to the right or the bed to the left.

On a delta printer, the X tower should be on the left, the Y tower on the right, and the Z tower at the back.

=== My Duet won't respond ===

See
[[What to do if your Duet won't respond]] pagerespond]].
The3D printers must be configured to use a right-hand coordinate system. If you have configured your printer to use a left-hand coordinate system, your prints will come out mirrored.

Looking at
the front of the printer. the most common arrangement using a right-hand coordinate system is:

* +X moves the print head to the right
* +Y moves wither the print head away from you (towards the rear of the printer), or the bed towards you (towards the front of the printer)

A few printers (e.g. the Ormerod) have +X moving the head towards you, and +Y moving either the head to the right or the bed to the left.

On a delta printer, the X tower should be on the left, the Y tower on the right, and the Z tower at the back.

=== My Duet won't respond ===

See
[[What to do if your Duet won't respond]] pagerespond]].

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes