Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to FAQ

Jason Znack

 
Recent firmware versions do not allow axes to be moved before they have been homed. The only movements allows are homing moves (G1 moves with S1 or H1 parameter) and individual motor moves (G1 moves with S2 or H2 parameter). So any Z movements that your homing files make before Z is homed should use the S2 parameter. Alternatively, add M564 H0 to config.g to allow axis movement before homing.
 
=== What do I need to know to convert an existing printer to use the Duet? ===
 
See here: [[Going from Marlin on Arduino to RepRapFirmware on Duet]]
 
=== I'm having trouble with the BLTouch Z Probe. ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes