Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet Wiring Diagrams

Tony

[summary_image|246summary_image|385]
[summary_image|246summary_image|385]
 
[title|Duet Wiring Diagrams]
The version 1.0 and later boards is shown in the diagram below.
 
[image|242|size=largeimage|386|size=large]
[image|242|size=largeimage|386|size=large]
 
Click'''Click on the file for a larger versionversion'''
Click'''Click on the file for a larger versionversion'''
 
For more information on driver numbering check out the wiki pagepages on [[DriverChoosing and heater numbers]]connecting stepper motors#Section_Stepper_Driver_Numbering|Stepper Drivers]] and [[Heaters|heater numbers]].
For more information on driver numbering check out the wiki pagepages on [[DriverChoosing and heater numbers]]connecting stepper motors#Section_Stepper_Driver_Numbering|Stepper Drivers]] and [[Heaters|heater numbers]].
 
''(There is an error on v1.0 and v1.01 on the silkscreen where the E0-/E1- and VIN are reversed - use the diagram above rather than the silkscreen. This is fixed in v1.02 boards)''
c)endstop connectors reversed.
 
[image|243image|243|align=center]
[image|243image|243|align=center]
 
If you are looking for the Duex2/5 wiring diagrams see this page: [[Duex wiring diagrams]]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes