Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet Wiring Diagrams

David Crocker

[image|848|size=large]
 
'''Click on the fileimage for a larger version'''
'''Click on the fileimage for a larger version'''
 
For more information on numbering check out the wiki pages on [[Choosing and connecting stepper motors#Section_Stepper_Driver_Numbering|Stepper Drivers]] and [[Heaters|heater numbers]].
''(There is an error on v1.0 and v1.01 on the silkscreen where the E0-/E1- and VIN are reversed - use the diagram above rather than the silkscreen. This is fixed in v1.02 boards)''
 
For the initial beta testers who have the old WHITE prototype 2=== Pre-production (white) Duet WiFi boards the pin out is below. the differences from the production boards are:===
For the initial beta testers who have the old WHITE prototype 2=== Pre-production (white) Duet WiFi boards the pin out is below. the differences from the production boards are:===
 
a)probe connector reversed.For the initial beta testers who have the old WHITE pre-production boards the pin out is below. the differences from the production boards are:
a)probe connector reversed.For the initial beta testers who have the old WHITE pre-production boards the pin out is below. the differences from the production boards are:
 
b)SD and LCD connectorsa) probe connector reversed.
b)SD and LCD connectorsa) probe connector reversed.
 
c)endstopb) SD and LCD connectors reversed.

c) endstop connectors reversed.

'''The following diagram is for white pre-production Duet WiFi boards only!'''
c)endstopb) SD and LCD connectors reversed.

c) endstop connectors reversed.

'''The following diagram is for white pre-production Duet WiFi boards only!'''
 
[image|627|align=center]
 
=== DueX2 and DueX5 ===
 
If you are looking for the Duex2/5 wiring diagrams see this page: [[Duex wiring diagrams]]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes