Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet Web Control Manual

Tony

Axes can be moved using the buttons in large or small steps and the axes co-ordinates are shown in the machine status box:
 
[image|262|size=large|align=centerimage|704|align=center]
[image|262|size=large|align=centerimage|704|align=center]
 
Note that by default an axis will not be allowed to move outside of the printer dimensions set in the printer configuration file. The axis movement speed is set in the Settings->UserInterface->Machine Control section.
 
=== Adjusting movement amounts ===
 
[image|748|size=large|align=center]
 
The values of buttons to move each axis by a certain step size (e.g. 100,10,1,0.1) can be adjusted by right clicking on the button in question and entering a new value. Note that this value will be used for both positive and negative movement for that axis. These values are not saved unless you go to the settings page and "apply settings".
 
=== Probing the Bed ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes