Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet 2 Maestro 12864 display menu system

David Crocker

* F is a font to select. There are currently two fonts, 0 (small, the default) and 1.
* D is a number of decimal places to show when displaying numbers. If zero (which is the default), no decimal point is shown.
* T is text to be displayed. In firmware 2.02RC52.02 and later, the letter T can be omitted because an un-prefixed quoted string will be treated as a T parameter.
* T is text to be displayed. In firmware 2.02RC52.02 and later, the letter T can be omitted because an un-prefixed quoted string will be treated as a T parameter.
* L is a menu or image filename to be used
* W is the width of the element in pixels. If not specified then for buttons and text items, the minimum width needed to print the text is used, with a small margin to allow for highlighting in the case of buttons.
* H is the horizontal alignment (RRF 2.02RC52.02 and later). 0 = left (default), 1 = centre, 2 = right. Buttons are always centre-aligned.
* H is the horizontal alignment (RRF 2.02RC52.02 and later). 0 = left (default), 1 = centre, 2 = right. Buttons are always centre-aligned.
 
The following commands are supported:
| Estimated print time remaining, based on progress through the file
|--
| 53y537
| 53y537
| no
| Estimated print time remaining, based on filament consumption (not always available)

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes