Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet 2 Maestro 12864 display menu system

David Crocker

Duet electronics is capable of being used in many different configurations, and OEMs have differing requirements. So a fixed menu system is not suitable. Therefore the menu structure is defined in SD card files.
 
Before you can use the 12864 display, you must use the M918 P1 Enn command to enable it and(P1)and set the encoder resolution and directiondirection (Enn, where nn usually needs to be -4, -2, 2 or 4). This command can be put in the config.g file.
Before you can use the 12864 display, you must use the M918 P1 Enn command to enable it and(P1)and set the encoder resolution and directiondirection (Enn, where nn usually needs to be -4, -2, 2 or 4). This command can be put in the config.g file.
 
You can find a set of menu files suitable for a typical single-extruder machine at https://github.com/mudcruzr/Duet-Maestro-12864-Menu-Files/releases (thanks to user mudcruzr for providing this). If you want to create your own set of menu files, or modify existing ones, read on.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes