Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Duet 2 Maestro 12864 display menu system

David Crocker

* F is a font to select. There are currently two fonts, 0 (small, the default) and 1.
* D is a number of decimal places to show when displaying numbers. If zero (which is the default), no decimal point is shown.
* T is text to be displayed. In firmware 2.02RC52.02 and later, the letter T can be omitted because an un-prefixed quoted string will be treated as a T parameter.
* T is text to be displayed. In firmware 2.02RC52.02 and later, the letter T can be omitted because an un-prefixed quoted string will be treated as a T parameter.
* L is a menu or image filename to be used
* W is the width of the element in pixels. If not specified then for buttons and text items, the minimum width needed to print the text is used, with a small margin to allow for highlighting in the case of buttons.
* H is the horizontal alignment (RRF 2.02RC52.02 and later). 0 = left (default), 1 = centre, 2 = right. Buttons are always centre-aligned.
* H is the horizontal alignment (RRF 2.02RC52.02 and later). 0 = left (default), 1 = centre, 2 = right. Buttons are always centre-aligned.
 
The following commands are supported:
|--
| 501
| no(1no (1)
| no(1no (1)
| Message from the last M117 command
|--
| 510-518
| yes(2yes (2)
| yes(2yes (2)
| Current axis location in user coordinates (X, Y, Z, U, V, W respectively)
|--
|--
| 521
| yes(1yes (1)
| yes(1yes (1)
| Z baby-step offset
|--
| 530-533
| no
| Actual IP address, octets 1 through 44. Deprecated when using firmware 2.03 or later, use 534 instead.
|--
| 534
| no (3)
| Actual IP address
|--
| 535
| no (3)
| Percentage of the current print file that has been processed
|--
| 536
| no (3)
| Estimated print time remaining, based on progress through the file
|--
| 537
| no
| Estimated print time remaining, based on filament consumption (not always available)
| Actual IP address, octets 1 through 44. Deprecated when using firmware 2.03 or later, use 534 instead.
|--
| 534
| no (3)
| Actual IP address
|--
| 535
| no (3)
| Percentage of the current print file that has been processed
|--
| 536
| no (3)
| Estimated print time remaining, based on progress through the file
|--
| 537
| no
| Estimated print time remaining, based on filament consumption (not always available)
}
 
(1) = implemented in firmware 2.02RC52.02 and later only

(2) = alterable in firmware 2.02
and later only
(1) = implemented in firmware 2.02RC52.02 and later only

(2) = alterable in firmware 2.02
and later only
 
(23) = alterableimplemented in firmware 2.02RC52.03RC1 and later only
(23) = alterableimplemented in firmware 2.02RC52.03RC1 and later only
 
=== File format for 'image' command ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes