Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Connecting endstop switches

Tony

=== Configuring endstop switches in firmware ===
 
The [[G-code#M574:_Set_endstop_configuration|Gcode?#Section_M574_Set_endstop_configuration| M574]] gcode is used to configure endstops. For more detail on specific types of printers see:
The [[G-code#M574:_Set_endstop_configuration|Gcode?#Section_M574_Set_endstop_configuration| M574]] gcode is used to configure endstops. For more detail on specific types of printers see:
 
* [[ConfiguringRepRapFirmwareCartesianPrinter#Section_Movement_section|Configuring RepRapFirmware for a Cartesian printer]]

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes