Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Connecting and configuring fans

Tony

 
* The Duet 2 (WiFi an Ethernet) has three controlled fan connectors FAN0, FAN1 and FAN2 plus two always-on fan connectors. A jumper (V_FAN) allows you to select whether all fans are powered from the main (12/24V) supply or from the Duet's 5V supply. FAN1 is on by default at power up, for maximum safety when you configure it as a thermostatically-controlled fan.
* The Duex2 and Duex5 have 6 further PWM controllable fans (FAN3 - FAN8). ''(Versions before 0.8 had 5 fan connections see the [[Duex2 and Duex5 Features|Duex hardware page]]for details)''
* The Duex2 and Duex5 have 6 further PWM controllable fans (FAN3 - FAN8). ''(Versions before 0.8 had 5 fan connections see the [[Duex2 and Duex5 Features|Duex hardware page]]for details)''
 
Older members of the Duet family have different provision for connecting fans:

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes