Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Connecting and configuring fans

David Crocker

== Using a fan connector as a general purpose output ==
 
If you use the I-1 parameter in the m106M106 command for a fan, then the fan is disabled which frees up the pin for use as a general purpose I/O pin that can be controlled using M42.
If you use the I-1 parameter in the m106M106 command for a fan, then the fan is disabled which frees up the pin for use as a general purpose I/O pin that can be controlled using M42.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes