Revision to Connecting an LCD control panel
| } | |
| - | If you have no temperature daughter boards installed, then one way to cable this is to use both the ribbon cable and the 4-way cable, and cut conductors 1, 9 and 10 of the ribbon cable. ***You must be sure to cut conductor #1 to avoid feeding +5V into the microcontroller***. |
| + | [image|4292|align=right] |
| + | |
| + | If you have no temperature daughter boards installed, then one way to cable this is to use both the ribbon cable and the 4-way cable, and remove conductors 1, 9 and 10 of the ribbon cable as illustrated here. ***Caution! Using a ribbon cable with all conductors present will feed +5V into the microcontroller!*** |
| === Firmware configuration === |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.