Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to Connecting an LCD control panel

Tony

==== Option 1: Ribbon cable ====
-Connect a 10-way ribbon cable between socket X5 on the PanelDue and socket CONN_SD on the Duet WiFi. The connector is a standard 10 pin 2 row 2.54mm pitch box connector that accepts IDC connectors for 1.27mm ribbon cable.
+Connect a 10-way ribbon cable between socket X5 on the PanelDue and socket CONN_SD on the Duet 2. The connector is a standard 10 pin 2 row 2.54mm pitch box connector that accepts IDC connectors for 1.27mm ribbon cable.
[image|297|size=large]
The length of the 4-way cable is not critical, however the resistance per conductor should not exceed 0.1 ohm. The SD card socket on the TFT panel will not be functional. The cables supplied by Escher3D and Duet3D are about 800mm long.
-=== PanelDue versions 1.0,1.1. or 2.0 and/or Duet WiFi revision 1.0 or Duet 0.8.5 ===
+=== PanelDue versions 1.0,1.1. or 2.0 and/or Duet 2 WiFi revision 1.0 or Duet 0.8.5 ===
Use the 4-way cable as described above. If you are using PanelDue 2.0 or 3.0 with Duet 2 (WiFi/Ethernet) then you can optionally connect the ribbon cable as well in order to use the SD card socket on the TFT panel.
|! PanelDue 1.1 X5 pin #
|! PanelDue 2.0 X5 pin #
-|! Duet WiFi signal name
-|! Duet WiFi CONN_SD pin #
+|! Duet 2 signal name
+|! Duet 2 CONN_SD pin #
|! Duet 0.6/0.8.5 signal name
|! Duet 0.6/0.8.5 Expansion pin

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes