Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to Connecting an LCD control panel

David Crocker

[image|2515|align=right]
-A PanelDue can be connected to connector IO_0 using a 4-core cable wired like this. Note that while the PanelDue can be connected while a Single Board Computer is attached to control the Duet, the PanelDue will not be fully functional (file operations do not work correctly as of RRF 3.0). PanelDue is fully functional (except SD card socket) in Duet 3 stand-alone mode.
+A PanelDue can be connected to connector IO_0 using a 4-core cable wired like this.
=== Duet 2 WiFi, Ethernet and Maestro ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes