Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Help

Revision to Connecting an LCD control panel

Jason Znack

Use a 4-core cable terminated in a Molex KK or compatible connector at the PanelDue end and a 2x4 Dupont-style connector at the Duet end. This plugs into the end of the expansion connector. See https://miscsolutions.wordpress.com/paneldue/.
+== PanelDue config.g setup for RepRapFirmware 3 ==
+
+''Note:'' Using a PanelDue with Duet 3 and Duet 2 and RRF3 will require '''M575 P1 S1 B57600''' being present in config.g. Previously in RRF2 this was assumed as the default, so your config from RRF2 may not include it.
+
== Limitations ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes