https://docs.duet3d.com/
Help

Revision to ConfiguringRepRapFirmwarePolarPrinter

Tony

[/code]
-If your [[Glossary_of_Terms#Endstop|endstop]] switches produce active low outputs instead of active high, replace S1 in the M574 command by S0.
+If your endstop switches produce active low outputs instead of active high, replace S1 in the M574 command by S0.
== Homing files ==

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes