https://docs.duet3d.com/
Help

Revision to ConfiguringRepRapFirmwarePolarPrinter

David Crocker

In the M92 command, the Y parameter is the steps per degree of rotation of the turntable.
-When you give a G1 S1 or G1 S2 command, the Y coordinate in that command must be specified in degrees.
+When you give a G1 H1 or G1 H2 command (or G1 S1/G1 S2 for older firmware versions), the Y coordinate in that command must be specified in degrees.
=== Example ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes