https://docs.duet3d.com/
Help

Revision to ConfiguringRepRapFirmwarePolarPrinter

David Crocker

=== Changes to other commands ===
-In the M92 command, the Y parameters is the steps per degree of rotation of the turntable.
+In the M92 command, the Y parameter is the steps per degree of rotation of the turntable.
When you give a G1 S1 or G1 S2 command, the Y coordinate in that command must be specified in degrees.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes