Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to ConfiguringMultipleIndependentXcarriagesCartesian

Tony

* Set up the tfree#.g files to home or park a carriage when you stop using it.
 
A machine with 2 independent X carriages needs 4 axis motors and 2 extruder motors, total 6. As the Duet 2 WiFi and Duet 2 Ethernet have only 5 motor drivers, you will need to add a 6th stepper driver via the expansion connector. The easiest way is to use a DueX2Duex 2 or DueX5Duex 5 expansion board.
A machine with 2 independent X carriages needs 4 axis motors and 2 extruder motors, total 6. As the Duet 2 WiFi and Duet 2 Ethernet have only 5 motor drivers, you will need to add a 6th stepper driver via the expansion connector. The easiest way is to use a DueX2Duex 2 or DueX5Duex 5 expansion board.
 
'''NOTE:''' the U axis uses the E0 endstop input, and the V axis uses E1.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes