Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Choosing and connecting stepper motors

Tony

* If using a highly-geared extruder (for example, an extruder that uses a flexible drive cable to transmit the torque from the motor to a worm reduction gear), use a short low-inductance 1.8deg/step motor to drive it.
 
== Connecting stepper motorsStepper Driver Numbering ==

===Driver Numbering ===
== Connecting stepper motorsStepper Driver Numbering ==

===Driver Numbering ===
 
Drive numbers used in G-code correspond to the following driver labels on the board(s):
 
To see the exact location of the pins check the [[Duet Wiring Diagrams|Duet wiring diagrams]]
 
== Connecting stepper motors ==
 
=== Using the internal drivers ===

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes