Revision to Choosing a bed heater
|Use a low voltage drop DC/DC SSR such as the Auber Instruments MGR-1DD80D100 or Crydom DC100D40. The SSR may need a heatsink, depending on the current. Do not be tempted to use a cheap DC-DC SSR such as the SSR-40DD, which is basically useless for this application because of its high voltage drop.|
|==== Configuring bed hater ====|
|add M305 command to config.g [[[Gcode#Section_M305_Set_temperature_sensor_parameters|M305 command specs]]]|
|if you want to remove heatbed from the system add|
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.