Skip to main content

Site Navigation

Your Account

Choose Language

Help

Revision to Choosing a Z probe

David Crocker

| Light
| Most
| Usually high when used with opaque bed surfaces, medium or sometimes low with transparent surfaces
| Usually high when used with opaque bed surfaces, medium or sometimes low with transparent surfaces
| Transparent surfaces (glass, PEI etc.) must be backed with a matt black surface. See https://miscsolutions.wordpress.com/mini-height-sensor-board/.
|--
| Light
| Any
| High or medium
| High or medium
| For FSRs use JohnSL interface board. Mainly used with delta printers. Trigger height may vary a little with probing position.
|--

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes